We are Importer, Supplier & Seller of Scientific Instrument, Medical Equipment, Laboratory Chemical, Glassware, Pharmaceutical Raw, Q.C Material...
0 items৳ 0.00
No products in the cart.

Laboratory Autoclaves Model: CLG–32 L Brand: ALP, Japan

Compare

Technical Specifications
Capacity (Liters) 54 Liters
Chamber (usable inner dia x depth) Ø320 x 676 mm
Operating Temperature Sterilizations 100˜140° c
Dissolution / warning Dissolution: 40˜99°c, warming 40˜60°c
Maximum operating pressure 0.270 MPa
Sterilization / Dissolution / Warm time Sterilizations /
dissolutions : 0 min ˜ 48 hrs 00 min.(& continuous)
warming : 0 min ˜ 48 hrs 00 min
Air exhaust system Gravity substitution : pulse air purge by temp & press sensing or
timed free steaming (time : adjustable) selectable
Memorized programs 15(16… DVP) programs available by operation pattern and data
Vacuum pump Water sealed vacuum pump Pre- vacuum Triple pulse vacuum system
Vacuum drying Alternate operation of vacuum and suction or continuous vacuum operation
Heating method Electrically heated chamber outside
Drying temp range 60 to 150°c
Drying time 0 min ~100 hrs 00 min
Suction air filter 0.2 µm micro cartridge filter
Start timer Able to set operation start by calendar month day hour minute
Drain value CLG models manual value CLG DVP model automatic valve & manual valve
Auto water supply Automatic water supply system from city water faucet by level sensor
& controller Pre heat system To shorten the come up time 40~75°c provided only with auto water supply
Exhaust air filter PTFE membrane filter (bore 0.2µm) in stainless housing on front outer panel
Safety device Lid interlock system electro mechanical lock system double check system of lid close over
pressure detector over temp detector water lack preventer sensor break indicator abnormal time indicator
memory of power failure safety valve breaker for slight leakage over current & short circuit.
Pressure equipment directive Category II
Safety valve 0.270MPa Hydrostatic test 0.538MPa
Pressure gauge 0~0.7MPa -0~0.6MPa
Pressure sensor -0.1~0.5MPa
Material of chamber SUS 304 stainless steel
Material of enclosure Steel with melamine resin/heat resistant plastic
Power requirement AC220/230/240V Single phase 50/60 Hz
Current rating 12A Heat output 2.6/2.8/2.9KW
Outer dimensions (WxDxH) /Weight 550 x 550 x900 mm/ 65 kg

Reviews

There are no reviews yet.

Be the first to review “Laboratory Autoclaves Model: CLG–32 L Brand: ALP, Japan”

Your email address will not be published. Required fields are marked *